
Metal Roofing in Phoenix, AZ
Standing seam and metal panel roofing engineered for Arizona heat, with reflective finishes that cut attic temps and last 40+ years.
Metal Roofing in Phoenix, AZ at a glance
Fast, factual answers Phoenix-metro homeowners search for before hiring. Written by our Chandler-based crew, not a content agency.
- Service
- Metal Roofing
- Coverage
- Greater Phoenix
- License
- ROC 361724
- Starting
- $9.50 to $13 per sq ft
Who provides metal roofing in the Phoenix metro?
Power Peak Roofing is a 5.0-star licensed Arizona contractor (ROC 361724) offering metal roofing across Chandler, Phoenix, Mesa, Gilbert, Tempe, Scottsdale, and the East Valley.
Local crew based in Chandler, AZ. Every project includes a written workmanship warranty, manufacturer-certified materials, and photo documentation for HOA or insurance submittals.
How much does metal roofing cost in Phoenix, AZ?
Typical Phoenix-area metal roofing projects start around $9.50 to $13 per sq ft, depending on roof size, pitch, and material.
Arizona sun and monsoon exposure make underlayment and flashing condition the biggest cost drivers. Your free on-site inspection returns a line-itemed quote so you can compare fairly.
How fast can you schedule metal roofing in the Valley?
Free inspections are typically booked within 24 to 48 hours; emergency and active-leak calls get same-day response.
Call (602) 975-3359 or request an inspection online. We serve the entire Greater Phoenix metro from Queen Creek and Apache Junction to Scottsdale and Paradise Valley.
Metal Roofing done the right way in the Valley of the Sun
Metal roofing is one of the smartest long-term investments a Phoenix-area homeowner can make. A properly installed standing seam or exposed-fastener metal roof lasts 40 to 70 years, reflects the Arizona sun instead of absorbing it, and shrugs off monsoon wind that tears shingles off neighboring homes.
Power Peak Roofing installs metal roofing across Chandler, Phoenix, Gilbert, Mesa, Scottsdale, Tempe, and Queen Creek. We use Kynar 500 painted panels with high solar reflectance, hidden-fastener standing seam profiles, and underlayments rated for the 160+ degree deck temperatures a Valley roof actually sees.
What this service includes
- Standing seam metal roof installation (1.5 in. and 1.75 in. seam heights)
- Exposed-fastener R-panel and PBR panel installs for outbuildings and modern homes
- Cool-roof rated Kynar 500 / PVDF painted finishes for heat reflection
- Metal roof replacement over existing shingle or tile decks
- Custom flashing, ridge caps, and valley metal fabricated on-site
- Snap-lock and mechanically-seamed profiles for low-slope sections
- Metal accent roofs over patios, entryways, and bay windows
Materials and systems we install
Fade-resistant paint system with high solar reflectance values, engineered specifically for hot desert climates.
Heavy-gauge Galvalume steel with hidden clip fastening, no exposed screws to fail in UV.
High-temp self-adhered underlayment rated to 260 degrees, the correct spec under metal in Arizona.
Cool-roof certified panels in Bone White, Sandstone, Slate Gray, and other Valley-friendly colors.
Our process
- 1Free on-site quote
We measure, photograph existing conditions, and write a line-itemed proposal that spells out gauge, profile, and color.
- 2Panel and color selection
You pick from cool-roof rated Kynar colors with published solar reflectance and emissivity values.
- 3Tear-off and deck prep
We tear off existing roofing, inspect the decking, and install high-temp underlayment before a single panel goes on.
- 4Panel and trim install
Panels are cut to length, clipped or fastened per manufacturer spec, and finished with custom-bent ridge, hip, and valley trim.
- 5Final walk and warranty
You get a manufacturer paint and substrate warranty plus our written workmanship warranty in writing.
Warning signs to watch for
- Your current shingle roof is 15+ years old and you want the last roof you'll ever buy
- Second-story attic temperatures spike above 140 degrees in summer
- Monsoon winds keep lifting shingles or blowing off ridge caps
- You're building a modern or ranch remodel and want a standing seam look
- You have a low-slope section where tile or shingles keep leaking
- You want a Class A fire-rated roof for a home near desert brush
Typical pricing in the Phoenix market
Ranges reflect typical Greater Phoenix projects. Your free, no-obligation inspection includes an exact line-itemed quote for your specific roof.
Free Metal Roofing Quote
Get an honest, line-itemed quote from a local Arizona roofer. No pressure, no upsells.
Schedule My Free Inspection (602) 975-3359Related roofing services
Materials we install
Metal Roofing available in
- Metal Roofing in Chandler, AZ
- Metal Roofing in Phoenix, AZ
- Metal Roofing in Mesa, AZ
- Metal Roofing in Gilbert, AZ
- Metal Roofing in Tempe, AZ
- Metal Roofing in Scottsdale, AZ
- Metal Roofing in Queen Creek, AZ
- Metal Roofing in Ahwatukee, AZ
- Metal Roofing in Sun Lakes, AZ
- Metal Roofing in Apache Junction, AZ
- Metal Roofing in Paradise Valley, AZ
- Metal Roofing in Fountain Hills, AZ
Recent Metal Roofing Installs
Real before-and-after photos from recent metal roofing projects across the Valley.
Metal Roofing questions, honestly answered
Common questions Phoenix-area homeowners ask us about metal roofing. Don't see yours? Call (602) 975-3359.
Schedule Your Free Roof Inspection
Residential or commercial, repair, replacement, or inspection. Our Chandler-based team calls back within 1 business hour.

Start Your Free Roof Inspection
Takes less than 60 seconds. Our Chandler-based team will contact you within 1 business hour.
- Service
- Property
- Contact
Talk to a real Arizona roofer
Prefer to reach out directly? Use any of the options below, a licensed team member will get back to you fast.
- Call us now(602) 975-3359Tap to call · 1-hour callback
- EmailOffice@powerpeakroofing.comWe reply within 1 business hour
- Office235 W Warner Rd, Suite 8Chandler, AZ 85225
- HoursMon-Fri · 8 AM - 5 PMEmergency repairs available 24/7